Automag Bits - (Possibly working, loads of bits)

[Pump'n'Splat]

For sale are my old Automag bits - I got these to make a fort cannon thing, but gave up - i've used them in various incarnations now and again and they do work, to a degree, a few problems with re-cocking, I wont say these are in goodworking order, but someone with some tech knowledge of an Automag would be able to make at least one working mag out of the parts, entirely possible with a bit of TLC that they could both be in decent working order again. Both triggers operate, paint is a bit flaky on both but the bodies are sound, the trigger guards had been cut away when I got them.

One has a set of wooden handles, the other plastic - there is a gas thru grip, and also a screw-cap with an air attachment for the other one (or you can screw a bottle direct into the "reg" thread, oldskool!) - Various quick connect air bits and a big braided hose.

One of the bodies has a sight rail welded on

There is a full spares kit with a shiny new spring, all kinds of o-rings and gaskets and a good handful of the softies for the soft nose bolt - there is also a spare hard-nosed bolt - all kind of maintenance bits.

There's a hopper elbow and 4 x Barrels:

1 x Straight smooth heavy stainless barrel
1 x crown Point Barrel
1 x Green Anno'd barrel with air rifling holes.
1 x Stubby tiny barrel, to turn it into a pistol (This is mainly how i've been using it in scenario days on a remote! )

Barrel Bung.

http://img121.imageshack.us/img121/9272/automag2.jpg
http://img33.imageshack.us/img33/1568/automag3.jpg
http://img703.imageshack.us/img703/7954/automag4.jpg
http://img51.imageshack.us/img51/9623/automag5.jpg
http://img842.imageshack.us/img842/1856/automag.jpg


I'm looking for £35 inc postage (cos the job lot is heavy) - but feel free to make offers. I'm not going to split this out at all.

Cheers

Nik

 

[cliffords the man]

Will take the lot off your hands for the 35

 

[Pump'n'Splat]

Cool.....but read your p/m reply first mate, I really wouldn't want you to take these without being happy that you can work with the kit

Nik

 

[cliffords the man]

I've got a friend who knows abit about them,

Always need a project to work on

Cheers

 

[Pump'n'Splat]

**Sold** - Mods can you please graveyard this one?

Though for Cliffords, here's one of them functioning-ish (was having recock problems) at our November Zombieland Walkon (Hence the Shaun of the Dead getup!) - as a pistol on remote

[/URL] Uploaded with ImageShack.us[/IMG]

 

[baudsenseless]

1st ....... that little barrel is awsome!!!
2......if you want to sell the wooden grips at any point clifford, give me a shout!