hi just bought a 2005 e-blade cocker off of here just got it through the post today i put new battery in it full air tank on it turned it on but it wont fire any ideas on how to sort it out please help guys/gals
autococker probs
- Thread starter mabdog
- Start date
Turn off the eyes mate, then it should fire.
Manual here:
http://www.planeteclipse.com/folders/downloads/Manuals/E2Vol1.pdf
Manual here:
http://www.planeteclipse.com/folders/downloads/Manuals/E2Vol1.pdf
As said make sure eyes are off.
Check out: http://www.moodypb.com/cart/index.php?main_page=index&cPath=23&zenid=80a998365e24b2ef71ca56396dba2d7b
for all your cocker needs
Check out: http://www.moodypb.com/cart/index.php?main_page=index&cPath=23&zenid=80a998365e24b2ef71ca56396dba2d7b
for all your cocker needs
If the eyes hasn't cured it......
Without gassing it, pull the back block back, switch on and turn eyes off, pull the trigger and the bolt should release........yes/no?
Ps, always c0ck a cocker before gassing it up
Without gassing it, pull the back block back, switch on and turn eyes off, pull the trigger and the bolt should release........yes/no?
Ps, always c0ck a cocker before gassing it up
i have tried with eyes on/off and with no gas but still nothing i put my mech grip on and it fires so could it be a prob with the e grip?? also is there a place/person i could send to to have it serviced i.e new o-rings etc etc.??
Check the trigger adjustment. Throw may be too short to trip the optical sensor on the board. Switch gun on then hold button in again to switch off, but instead of using on/off button pull trigger. If gun switches off the trigger sensor is detecting a pull, if not it needs some adjustment.
If trigger is set ok it could be a fault on the board, or with either solenoid.
If trigger is set ok it could be a fault on the board, or with either solenoid.
Silly question but did you install the grip yourself and have you got the sear release/cocking plugs round the right way?
If so, turn on/ eyes off/ no gas, pull the trigger....are you getting a quiet click click click with each trigger pull?
We need to establish what the gun is or isn't doing?
Is it doing nothing, quiet clicks, burping and farting or what?
yay!!!
cheers guys for all your help it was the trigger not set up right in the end adjusted it so now it fire but i have run out of air so i wont know if it fires and re-cocks until the weekend aint that always the way??!!
anyway cheers again guys
cheers guys for all your help it was the trigger not set up right in the end adjusted it so now it fire but i have run out of air so i wont know if it fires and re-cocks until the weekend aint that always the way??!!
anyway cheers again guys