Autococker problem

[SamuraiSmurf]

I just bought a 99 autococker, and i'm having a lil problem with it, I didn't get instructions for it, but it seems that the cocking rods come out of the guns, and that would be where my problem lies, mine doesn't, And i want to make sure it's suppose to come before i go and use brute stength to try and get it out. If the cocking rod doesn't come out how do i change my velocity on it, Please i could use help on this ASAP if you have AIM u could try to reach me my SN is either Metallica42o or SamuraiSmurf00, thanx

 

[Arrival]

Go to buyshocktech.com and buy thier cocking rod. It has a slot for an allen wrench, so all it takes is the turn of the wrench to loosen it.

 

[Si.]

The cocking rod DOES come out.. yours is probably just in a bit tight.. you should never tighten it with a spanner or plyers.. just do it finger tight.

Kepp trying.. It will come out.

 

[Billy No Mates]

Originally posted by Si. - Hellfish
Kepp trying.. It will come out.

i bet thats what you tell all your lady friends too!

 

[Si.]

 

[Coran]

Buy yourself a Rex Nelspot Dialer Kit for velocity adjustments and you will never have to touch the cocking rod again. A complete bargain at around £30. Well worth it!

Of course, the cocking rod may not be your real problem. Can you give more info on what is or isn't happening?

 

[Munky]

Its possible there may be a bit of loctite on the end. I say that because I had to use a small amount of blue because my cocking rod would come loose with vibration so its possible they might have done the same?