Autococker LPR Help

[Narkadox]

Hey people, I brought myself a Resurection Autococker for Christmas but I've got a (hopefully) small problem with it.

I've just put a hopper of paint through it and it shot like a dream up until the very last shot when air started leaking from the LPR. I de-gassed it an it looks like an o-ring has ruptured? I had about 1K air in my bottle and the gun was chronoing at around 240fps (from the factory, haven't adjusted it at all).

https://www.dropbox.com/s/8g8r50bayoouj8w/2013-12-26 13.46.58.jpg

This is my first autococker and I've no experience taking them apart so I'm after some advice on how much of a problem it's going to be to get to this o-ring? Is it relatively simple or should I just wait until my local shop opens up again Saturday?

Thanks.

 

[Billdoddy]

Autocockers can be a pain to get back together, if I was you wait till your local shop opens as you don't have any experience dismantling cockers.

 

[Gee Tee]

If it's new it should still be under warranty in which case the shop that sold it should fix or replace it

 

[baudsenseless]

i'd go with geetee's advice. looks like it has spiked.

 

[Narkadox]

Yea just got back from taking it in. Turns out the LPR body had been screwed in too tight trying to get the Barbs to line up correctly, causing the o-ring to pop out.