asa loose on my creed v2

[Sayers]

hi guys i have a vanguard creed v2 but the asa is loose at the bottom, and im just wondering is there any way to tighten this without taking the whole marker apart?
thanks

 

[.Havoc.]

hi guys i have a vanguard creed v2 but the asa is loose at the bottom, and im just wondering is there any way to tighten this without taking the whole marker apart?
thanks

There are two allen scews that hold the ASA in place, for a quick fix at a walk-on you can tighten one that is accessable by just taking the rubber grip off... (removing the battery also). However I really would recomend taking out the board to get to the other to make sure that the ASA is on tight and safe.
Also, when you do tighten the ASA up, make sure you dont put it on the grip frame too far forward as you may not be able to get your bottle all the way on.

 

[SeanUK]

hi guys i have a vanguard creed v2 but the asa is loose at the bottom, and im just wondering is there any way to tighten this without taking the whole marker apart?
thanks

As said above if you remove the grip their are 2 screws at the bottom.
1 Screw is easy to get to with no real problems, the other screw (closest to the buttons) will require you to remove the board as you'll get more space to tighten/loosen

 

[Mclovin101]

Removing The Asa from The Grip Frame
http://www.youtube.com/watch?v=6x7qJFDbYj4

Re Assemble The Asa
http://www.youtube.com/watch?v=F8OGQjE6yMw

 

[Sayers]

Thanks guys, irl give it a try