any Axe expert on here?
- Thread starter roy2k14
- Start date
Its regard to the female air transfer tube, I know there is a little oring on the tip of it but when I had the parts back from anno I realised that the oring was fitted inside the Asa and too big to fit on the tube. Not sure if its safe to air it up but it seems the oring will still stop air from leaking out between the ASA and the transfer tube. Just want to be sure if this is fine, I don't have any spares at the minute and need the gun for the weekend. Also I can't screw the female tube all the way into the frame otherwise it will pushes the ASA rail further out leaving a gap between the frame and the asa, so I just screwed it in about 90% to fit the asa on properly is this like normal or...?
Well just like how I have described it, although I think it was like this before I took it apart and before then it had no issue air'ing up and shoots great so I'm not too sure whether this will be an issue, I haven't air up the marker yet as bolt need to be lubed as just got it back from anno
Looking at this the oring goes in the asa and then you screw the transfer tube into it from inside the grip, looks ok to me.
Okay cheers, I think that little oring is supposed to go into that hole anyways just wanna make sure its fine like this