budgie
open the left side grip cover so the board is displayed. at the bottom is a small black button.
switch on the marker then press the black button use 1 to 3 leds on red light, this will have no ramping.
-----------------
Flashing Red
1LED: low debounce setting
2LED: debounce
3LED: debounce
4LED: debounce setting (or Millennium mode s.05ver)
5LED: high debounce setting
6LED: ? PSP/CFOA mode ?
-----------------
Flashing Orange
1LED: Slow Hoppers
2LED: Fast Hoppers
3LED: Faster Hoppers
4LED: Fastest Hoppers
-----------------
Flashing Green
1LED: dwell@7ms
2LED: dwell@8ms
3LED: dwell@9ms
4LED: dwell@10ms
5LED: dwell@11ms
6LED: dwell@12ms
-----------------
Flashing Red/Orange/Green
1LED: 15 BPS CAP
2LED: ???
3LED: ???
4LED: ???
5LED: ???
6LED: 31 BPS CAP
-----------------
No Light => Software version (1 to 6)
use the trigger to cycle through the leds and the black button to swap between light colours
HTH
Bruce