Angel speed Problems

[angel_stu]

Hi guys

Im after an angel tech to have a look at my angel 04 speed in the hampshire area.

Problem is it is not holding charge and i cannot get the bolt cover open to check the battery.

Thanks in advance

Stuart

 

[Dusty]

Your battery will need replacing more than likely. Drop John C or Tom Allen a PM to see if they can help.

To get the battery out, you'll have to disconnect it and the solenoid from the board in the grip frame, remove the backplate and separate the body and frame then slide the battery out. You can't access it through the roto breech.

 

[angel_stu]

Ye i have been having a look at the manual! i cant get the back plate off because the bolt is forward so the pin at the rear wont budge! also the on and off switch seems to be the wrong way around! off is on and on is off!!

thanks for your reply

 

[Dusty]

Is the bolt stuck forward? if so push it back with a squeegee or something soft. The switch will simply rotate round when you get the backplate off.