Welcome To P8ntballer.com
The Home Of European Paintball
Sign Up & Join In

Angel Setup

pottts

Active Member
Dec 29, 2003
234
0
26
I'll tell you when i know
Hi guys and gals,

i am going to campain on the 1st, i have an Angel LCD 2k1 and want to set up the electronical settings such as:

ROF (Rate of fire actually achieved by user feature)
MROF (Maximum rate of fire feature)
Dwell feature

and any other settings you think i should change.

i want it to shoot fast without chopping paint. i have a Veiwloader 12v with X board and 0.8 ltr air bottle.

any help would be greatful.

Tom
 

jack

oh yer baby!
Dec 4, 2002
437
0
0
BIRMINGHAM
u cant set the ROF, thats a counter to show how fast you have shot.

but for the MROF, set it to 13 or 14 with a revvy, then dwell 14

this should let you shoot up to 13 - 14 BPS (depending on how fast your hopper will feed your marker) and the 14 dwell is factory set so it should be the best setting for you!

jack
 

Mark

UK Cougars
Jul 9, 2001
1,403
0
0
England
www.ukcougars.co.uk
A Revi will feed on a good day at 13bps so don't set your MROF at the same as the best the Revi can do you will find if you set it at the the ROF numbers you will get will read approx 9...the MROF setting is "opportunitys to fire" so if you pull 15 you won't get it you will get 14 set at the highest you can ..go to 20 and try it you "should" find you will get higher figures than when set at 14..if you get chops then back off a bit...a chop is all over the bolt with paint oozing out of the breech not paint on the bolt face and up the feedtube. 3 types of break on an Angel and any other marker to be honest, barrel..most common, bolt face second, chops last, admittedly a bolt face break can often be followed with a chop due to all the paint about causing drag but mistakes in description cause more comments as to change this or swap that. The ROF counters on every marker is a best guess by the electronics and rarely accurate. I had numbers around the 9-12 mark when I had an LCD set at 14.. put a Halo on and got 9-12 indicated...now something isn't correct given what a Halo is supposed to feed at but changed the MROF to 20 and then I got 14-16 see what I mean? The dwell advice is correct if you are railing paint but stilll get bolt breaks or chops as this will eliminate a fair few of these problems.