Angel Setup

[pottts]

Hi guys and gals,

i am going to campain on the 1st, i have an Angel LCD 2k1 and want to set up the electronical settings such as:

ROF (Rate of fire actually achieved by user feature)
MROF (Maximum rate of fire feature)
Dwell feature

and any other settings you think i should change.

i want it to shoot fast without chopping paint. i have a Veiwloader 12v with X board and 0.8 ltr air bottle.

any help would be greatful.

Tom

 

[chunk]

www.angel-owners.com

 

[Scars]

Set your mrof to 2 below maximum, i think its 18 on an lcd, reason i say this but it could be me is ive burnt 2 boards out putting my mrof to the highest setting, i think it might be to do with that

Set your dwell to 14

hope this is a help

 

[jack]

If it was me, i would drop the MROF to about 14 mate, that should reduce ur chances of chopping paint with a revvy

 

[Tinks]

er..im not really a mechanical genius like u guys
but i also have a problem!! wen i last played paintball with my first paintball gun, spyder victor, it kept chopping paint even tho i cleaned it out multiple times, any ideas?

 

[Pump'n'Splat]

With a mechanical it could be all kinds of things.....could be your velocity was too high, bad paint/barrel match, hopper type, or just one of those quirks Spyders have!!

...I chopped about 12 balls in one line a few weeks ago on my Spyder and despite sitting there with a squeegee and rag, couldn't figure out for the life of me why it did it...it also stopped recocking, then all of a sudden, came back to life and no more chopping

I haven't started messing with electros yet, so will leave that discussion up to the big board gods

 

[Mario]

rate of fire you cant change 9technically you can with how many shots you pull off but you know what i mean...), MROF leave it as it is till you can actually hit 12bps and then crank it up to 16. no higher than 16 tho as it can get temperamental, and the dwell should be about 12. Worked on my old LCd a treat....

 

[Tinks]

pump'n'splat! thats wot happened to me! maybe next time i use it, it'll be a-okay ,