angel pressure

[fkinugly]

i have a angel 04 with angel air. need a little advice as to setting the pressure from the reg.. i know its a low pressure marker but in the instruction book it says not to go above 800 psi. can i set the output to a low output of say 250 psi, will the regulator keep up with the rate of fire?? jon

 

[WingNut]

Which Angel do you have???

Does it have a volumiser on it???

 

[Dusty]

i think angel recommmends about 450 psi output. thats what i ran it at anyway when i was using angel air and it worked fine for me. no problems with high rates of fire at all.

 

[Paul_Mardon]

i was shooting my angel speed 04 at 200 psi with no drop down , i suppose it depends on how long u can get it be4 the u start getting dropdown. but 200 psi was running mine fine with no volumeiser.

 

[fkinugly]

i have a 04 speed..so as long as its below 800 as it says in the instruction book its ok! is the angel unique with the mini reg for low pressure to the marker then, coz thats where the confusion came from,. low pressure regs for bottles..

nope no volumizer (what do they do?)

 

[WingNut]

Originally posted by fkinugly
i have a 04 speed..so as long as its below 800 as it says in the instruction book its ok! is the angel unique with the mini reg for low pressure to the marker then, coz thats where the confusion came from,. low pressure regs for bottles..

nope no volumizer (what do they do?)

Set the output pressure of your AIR to 450psi. That will be fine.

Obviously, your new to Angels. Nothing wrong with that, it's just pointless blinding you with this and that until your a bit more comfortable with it.

Once you've had it a while, then you can start to 'tweak' it a little. You could maybe drop the input pressure quite a bit which will help with the consistency of the gun.

Take a look here www.angelowners.com

Everything you will ever need to know about any type of Angel is all there.

 

[fkinugly]

many thanks for the help