Angel Pressure?

[Albercent]

what presser should paradoxs max flow be feeding into his secondary reg?

and what roughly should his dwell setting be?

Al.

 

[Jamie]

I think the input preassure should be around 400psi higher then the output preassure of the secondary reg to prevent it from being starved and have a consistant input into it,

I dont know about the dwell though i should imagine there will be no set setting its more of a try it and see what happens, since every marker is slightly diffrent no two settings will be quite the same.

 

[bruce]

set the max flow output to around 500 to 600psi into the Angel front reg, the dwell should be around 14 but i have seen it differ slightly from marker to marker depending how its set up.

drop a Pm to Perv or Les from the Midlands Masters guys as they do the angel techs at the MM events

HTH

Bruce


P.s. how the shocker running

 

[Albercent]

cheers bruce + all

Al.

 

[PaintballBudgie]

Longer the dwell less likelyhood of chopping but will pay a penalty in speed.

I would set the max flo around 500 to 650psi

 

[TyroneD.Ni]

14 is the most common but thats if ure using decent paint the output should be from 600 to 750.