Angel pin problem

[Dunerat]

Ive got an Dark Angel LCD.
I put the thing on charge and on the screen came up ( - P I N - ).
I have tried the following
I switch on the gun and on the screen comes (-P I N-) I hold the trigger in then I press the bottom button and up comes ( 0 - - - ) Then I enter the code, after entering the code I hold in the top button, I let go of the trigger then a couple of seconds later I let go of the top button then on the screen its still says "pin" but the gun is live - how do I get rid of it saying pin and how can I get back into my menu?

 

[mikeanywhere]

Should have bought a proper Angel like the IR3 Fly thats needs a new home - what more can I say???

 

[Dunerat]

MMMM

Hey china

Ah well maybe I will have to adopt that fly hey

 

[Mark]

Originally posted by Dunerat
Ive got an Dark Angel LCD.
I put the thing on charge and on the screen came up ( - P I N - ).
I have tried the following
I switch on the gun and on the screen comes (-P I N-) I hold the trigger in then I press the bottom button and up comes ( 0 - - - ) Then I enter the code, after entering the code I hold in the top button, I let go of the trigger then a couple of seconds later I let go of the top button then on the screen its still says "pin" but the gun is live - how do I get rid of it saying pin and how can I get back into my menu?

You need to borrow a datalink cable or get a tech to reset it, you can try pressing both the buttons on the board that you can see with the grip off but AFAIR that just resets the settings not the PIN request.

 

[dr.strangelove]

I think you can reset that bad boy without the data link. Run a search at the www.angel-owners.com forums, there should be a whole mess of advice.

 

[Dunerat]

.

Went into that site but not much help they think my board is fried. But with a fried board you wouldnt be able to fire it, right?

 

[ChrisWhiteSTEL]

Depends what part of the board has gone, could be either battery/short problems or somewhere on the board there is a component failure. Get it checked by a tech for the safest bet.

 

[D6]

Originally posted by mikeanywhere
Should have bought a proper Angel like the IR3 Fly thats needs a new home - what more can I say???

Depends if it's a 'proper' colour too, eh Mike?

Dunerat, are you at Heavens Gate this weekend- probably be a tech there who'll have a look

 

[mikeanywhere]

Re: Re: Angel pin problem

Originally posted by DickySixx
Depends if it's a 'proper' colour too, eh Mike?

Dunerat, are you at Heavens Gate this weekend- probably be a tech there who'll have a look

He will there as he's using my IR3. I already checked out that the techies for the tourney will not be able to fix it so it means having to send it to someone to have a ganders.

 

[Dunerat]

Bah Humbug.