Angel LCD and Nitro Duck Preset

[vicker777]

Hi,

I have an Angel LCD and a Nitro Duck 3000 psi preset reg. Does anyone know what the preset out put is of the Nitro Duck? and what Dwell should I have my LCD at.

Main reason is I played this weekend with the setup above and had to crank the velocity srew almost right out and set my dwell at 22 before I got near 250 feet/sec.

Cheers
Vicker77

 

[Tom Allen]

The nitroduck will more than likely be 850 psi, which is fine for the lcd.

Dwell should be 14 or 16.

 

[dr.strangelove]

Check your LPR, might have something to do with your velocity (when I blew mine in my IR3 I had the same problem).

 

[dr.strangelove]

Oh, and if you're running a HALO, Odyssey recommends bumping your dwell to 17 (if you're having problems running your HALO)

 

[Tom Allen]

It sounds like the lcd may need a service.

 

[vicker777]

Thanks, anyone know where I can get my LCD serviced and at what cost. Is there anyone near Sheffield that can service it.

Cheers.

 

[le-pig]

i run a lcd on a 3k nitroduck as back up never had any problems ,as above have said it needs a service,sounds like muck around the hammer/inside your minireg
closest to you is probably mgj2000-uk on here or tom allen,both good,cheap service

 

[Tom Allen]

Originally posted by vicker777
Thanks, anyone know where I can get my LCD serviced and at what cost. Is there anyone near Sheffield that can service it.

Cheers.

I'll be at the next PA, which is J12 m6, this Sunday. An LCD service, costs £15 plus parts.