Angel IR3 Fly help UK

[mark123]

Does anyone know much about Angels?
When i air up and turn the velocity all the way, when fired the paintballs just fall out of the end of the barrell - is it anything to do with the low pressure and dwell settings?

 

[John C]

It could be a number of things....


If you have a manual, follow the trouble shooting tips in that..
The manual should be found at www.wdp.tv but their website is bloody useless.


Open the breach and make sure the gun is clean around the bolt. Look in the ram slot and make sure there is not a build up of crap in there.

Make sure your battery is charged.
Make sure your dwell is at 14
MAke sure your LPR is around 95.


I hope that helps.
John

 

[TheGurkha]

AND make sure your on/off is all the way in. iv seen it happen...

 

[John C]

Yeah good point Mr Gurkha, and be sure to use a HP output regulator.

 

[TheGurkha]

...and if you have them, make sure your lazer eyes are blinking

 

[John C]

Lazer eyes on an Ir3? Blinking? Causing low velocity?


Brinking right?

 

[TheGurkha]

Lazer eyes on an Ir3? Blinking? Causing low velocity?


Brinking right?

\

went over your head? lol

 

[Tom Allen]

mark have you got any further with this problem?