Angel G7 Fly + Evil Scion Air

[LeeE]

Hi, sorry to a hassle but i just got both my g7 fly and evil scion air system in the same place and am a little stuck on the getting them together part...

on the top of the reg is what i can only assume to be a rail, with two holes in it which matches the two on the bottom of the grip of the angel and two upside down screws in there... however i cannot see any way to get at the screws to screw them into the angel and i can's see any way to take off the 'rail' as it looks like it could only slide rather than pull off and the screws block any horizontal movement...after that i assume it's just a matter of attaching the macroline how it looks...

i assume there must be something really simple that i'm missing but i just can't see it...

thanks for any help

Lee

 

[lemonadeX]

Post up a pic if you can - Much easier to diagnose the problem

-Will

 

[LeeE]

warning big pics...

thats the bottom of the gun with the holes for the screws to fit into...

thats the reg with what i've been calling the rail on top, it has the two screws with must screw into the holes in the angel and are the right size/distance apart for it but i cant find a way to get at them...

i had a few of the other angles as well but imageshack is being awkward and i have to disappear, i'll try again with those later but i think those are the main ones...

thanks

Lee

 

[Paontball Mad]

i have the same setup

ok listen to this,

the evil air has a rail on it, at the back of that rail where it slides down to the bottle theres a screw unscure that until the rail is loose the rail and bottle will come apart. after that the rail will have 2 screws in it, attact that to the gun first make sure the rail is still pointing the same way. when screws are thighten push the bottle back on to the rail and then adjust it to your personal preferance and then screw that small screw thats close to the bottle (the same one that loosens it) so its very tight and holds the bottle in place.

also make sure the output pis is less than 450psi as the angel only works on lp


cheers Tim hope this helps

 

[LeeE]

ok, thanks a lot mate, have to run out now but i'll give it a go once i get back, just quickly, do you mean the allen key screw that's further up from the two screws that attach it to the gun? If so i'll have to grab me a set of keys as i don't have one that fits that but i'll get it sorted before i need to play...

thanks a lot

Lee

 

[Paontball Mad]

yes the very small one for allen keys

 

[LeeE]

cheers mate, i'll get that sorted when i get a chance

thanks a lot

Lee