Angel fault code Help

[Jud]

ok one of our guys haves a angel lcd when its powered up you get aroung half a dozen shots then it displays fault , and goes into safe mode, ? and wont come out of safe , unless you switch it off & on again .

im sure it says fault code 4 ? can you help

I have checked theres no bad earths , im thinking now its a board fault . ?

 

[liamliddy]

an lcd i had did exactly the same as this mate, give it a FULL charge, that should sort it out, unless its another problem causing the same effect, jsut doesnt have enough charge to keep the gun firing in live so reverts to safe, try it and let me know

 

[Mark]

Code 4 fault is an under temperature fault...same result as a Code 3 (over temperature fault) Board is on the way out...sorry.

LCD Info

TAB IN = Battery disconnected or Tab Key inserted when trying to charge

CODE 1 = Faulty battery (NOTE CODE) can occur during the first 3 charges when new or replacement battery is fitted

CODE 2 = Hopper using too much power (sticky motor)

CODE 3 = Over temperature (ambient temperature too high)

CODE 4 = Under temperature (ambient temperature too low)
(See external menu diagrams).

 

[enid_puceflange]

My lcd did the same mate, needed a new board , quick trip in a box to wdp , warranty job, and all was well
zeroes the shot counter and zero serial number too.
Gary c

 

[Jud]

thanks boys

curious how much was the new board ?

 

[enid_puceflange]

it was replaced free cos i was the markers "original first owner"
(hint hint)
done under warranty dude.
Gary c

 

[steviecarson]

when i got my board replaced it cost me £85 for the board and £20 odd labour dont know if that was cheap but i got my rail replaced aswell (+p&p)

 

[le-pig]

give to matt to play with (mgj2002 uk)

 

[Tom Allen]

Try resetting the board before you send it away, it may cure the fault.