Angel expansion chamber

[Jakey C]

Right guys where you screw on the expansion chamber i had a Little accident when replacing it what i did was take it out and the three(if i didnt lose any) sprung out
i picked up
A spring
The plastic cross shape with the bit stick out the back
And a metal rod with a plastic bit on the end
i put it in like this
first i put in the metal rod, i put it in rod down and it fell down the little hole
then i put in the spring balanced on the rods plastic bit
then the last plastic bit balanced on top of the spring is this right or wrong
thanks in advance

 

[Jakey C]

anyone got an idea dont wanna blow myself up when i next air it up

 

[Jakey C]

its not in the expansion chamber its the inside bit which goes on the gun itself so its inside the gun

 

[Tom37]

they will most likley have an exploded diagram somewhere on here:
http://www.angelowners.com/

speaking of explosions, if you dont want to blow yourself up once its fixed (or you think its fixed) turn the air on slowly, and listen for leaks.

 

[Jakey C]

done it cheers mate

 

[dr.strangelove]

You had it right. Those little bits are known as the cup seal, exhaust valve spring and spring guide for future reference. And the "expansion chamber" is more commonly referred to as a "volumiser" since it increases the volume of compressed air, whereas an expansion chamber usually serves as a space for liquid Co2 to expand into gaseous form. If you ever run into a problem like that again, WDP is internationally known for the quality of their manuals: lots of pictures, cutaways and diagrams. You can find them here: www.wdp.tv/manuals