Angel Al fly

[shogun666]

Got the above and it won't air up, there's just enough air to make the solinoid pop, I've took it all apart to see what's blocked but can't see any obstruction?

 

[Nickless Cage]

Not really familiar with Angels, but Battery is fresh?
Dwell could also be an issue?

 

[Evil Rich]

Check your solenoid, if it has a slight indentation where the grub screw holds it in place (metal strip, to protect it, maybe missing or dented) the solenoid internals could be crushed and therefore toast.

This is a worst case scenario

 

[Dygrasi]

And see if the solenoid gasket is sitting the right way.

 

[Fenix_Sweden]

I had the same problem with my A1 fly, the gun aired up with no leaks but when i pulled the trigger with eye:s off it just clicked in the solenoid, didnt cycle at all. It was like Evil Rish said, a small indent on top of the solenoid, i removed the chasing of the solenoid and tried to get the piston out, it wouldnt move at all without serious force. Had to buy a new solenoid.

 

[david525]

no parts anymore in the uk but I got a new solenoid for my angle lcd for usa

 

[royanddani]

There are a few parts