angel air help

[opstrat]

ok my angel air reg is leaking
on the side whare the out put elbow is there is a screw with a small ovel panel, air is leaking out of there over 900 psi, when it levels off at about 800 it seems to stop,
any advice?

cheers

 

[Scars]

unscrew the panel off and there should be a red circular seal

take it out - turn it over, whack some shocker lube on it and re assemble

should do the trick

 

[robtattoo]

Originally posted by Scars
unscrew the panel off and there should be a red circular seal

take it out - turn it over, whack some shocker lube on it and re assemble. Tie it to a house brick & lob it in a canal should do the trick

Harsh Ian, harsh but fair!

 

[Scars]

lmfao

 

[opstrat]

cheers mate only problem is i thgink the screw has been rounded but ill tackle what problem somehow

thansk again.

 

[Tom Allen]

Originally posted by opstrat
ok my angel air reg is leaking
on the side whare the out put elbow is there is a screw with a small ovel panel, air is leaking out of there over 900 psi, when it levels off at about 800 it seems to stop,
any advice?

cheers

Before anyone goes any further, this is supposed to happen.

The place where the leak is at 800psi + is an over pressure vent.

If you turn the pressure down, the leak stops.

Why do you want more pressure than 800 psi.?