Angel AIR Fill Nipple

[KitsuneAndy]

Mine appears to be leaking when trying to fill it, I've been told that it might just be the non-return piston needs to be cleaned.

Does this involve completely dismantling the AIR? if so, I dont know if I want to risk pulling the thing apart as I'm useless and will just break it..

 

[John C]

Remove all air from your system.
Take off the bottle.
Unscrew the fill nipple using a spanner or a 3mm alan key.
Clean the piston and seal inside the nipple.
If the seal is worn, replace it (or turn it over if you dont have a spare)
Put the nipple back on, remember to locktite the threads.

 

[Scars]

p!ss easy - take the nipple off - get a screwdriver and push the pin out through the bottom - clean and lube o ring and pin

push back into place and screw back on

Should do it!

 

[KitsuneAndy]

And the fill nipple should just come off with an allen key?

Righto, I'll go and attempt that in a little while

 

[KitsuneAndy]

ok, sorted that now, cheers guys