Angel a1 fly prob

[tomo110290]

Today i was at a walkon got my fly out and it would not shoot all it was doing was cycling the bolt as in no air was coming from the bolt, it had a brand new bat in it ive ordered a oring kit for it from npf so i will be changing all orings, i was using a myth 2 reg on my bottle could this be the problem

thanks

tomo

 

[Dusty]

Have you had it apart?
Was velocity screw set correctly?
Asa screwed in fully?
Leaking or anything?
Possibly a new valve stem needed?

 

[tomo110290]

Have you had it apart? No will be taking it apart when oring kit gets here
Was velocity screw set correctly? I thought this but wound it all the way out and all the way in and still the same
Asa screwed in fully? Yes
Leaking or anything? No i dont think so will check
Possibly a new valve stem needed? Not sure if oring kit dont sort it might be this

 

[benHK]

Sounds like the valve stem mate, exact same thing happened on my A1. Check and see if the plastic part on the valve stem is still firmly attached, if you can move it backwards and forward then it needs replacing.

 

[Evil Rich]

Weird if the bolt cycles then it suggests the rammer is OKay.
\if there is no leaks then the valve stem is holding in pressure but the stem itself could be damaged or snapped if the rammer is not opening it.
Saying that is the rammer fully cycling forward to hit and open the valve stem.

Anyway get a Dlite valve stem, they're gggggggrrrrreeeeeaaattttt!

 

[tomo110290]

valve stem is fine there was a tiny leak coming from the hp reg but i cleaned the reg and that has stoped now but still wont fire

 

[Evil Rich]

Is it fully cycling? The bolt fully closing into the breech/barrel end?
If not it suggests the rammer is not cycling properly

 

[tomo110290]

Is it fully cycling? The bolt fully closing into the breech/barrel end?
If not it suggests the rammer is not cycling properly

Bolt is coming fully forward just no air coming from it at all

 

[tomo110290]

vid of whats is happening

http://s282.photobucket.com/albums/kk271/tomo110290/?action=view&current=video-2012-05-07-18-47-01.mp4

 

[GRIMLOCK]

you got pressure testers?