Angel A.I.R

[Noony]

I'm thinking of getting an Angel A.I.R!

But as they don't have an on/off valve, is there a way i can turn off the air supply so i can de-mount it from my gun or do i have to empty the tank first?

Thanks in advance for any advice!

Noony

 

[Mark]

Yes you will have to empty the tank as it made but, you can either fit an on/off inline tap with a quick release the other side or the other option is to fit a Pro-connect this is in appearance is similar to a quick release the difference is this one hold the air so you can take your tank off, this is the system I have...next if you want to get one...mmm little difficult Rekka do them, 32 Degrees do one as do Boston Paintball Supplies I'm sure there are other suppliers but to get one from the States is by far the cheaper way even with postage.

 

[TheRo0sTer]

Ummm to shut the AIR output pressure off just turn the Set screw out till there is no more output pressure. When you are ready to rock and roll screw it back in to the perfect operating pressure for your marker. Using the LCD to determine that pressure!

 

[Noony]

So if i turn the output pressure down to Zero, i'll be able to disconect the AIR system from the the gun, without the need for Pro-connect system! If not how much are the Pro-connect systems?

 

[Mark]

I forgot to say you could turn the air flow off but I thought that was a given.

The Pro connects are around the £50 mark in this country as I said before you will get this down by trying online stores and getting it sent over. Of course an on/off tap and quick release will be cheaper but the hose line gets a little busy.

Boston Paintball

I did say about 32 degrees selling them I have only seen them as a branded part...the website for 32 degrees only gives links for dealers

Try Rekka as well to compare costs SITE

Just so you know what we are actually talking about

 

[Noony]

Cheers lads your've been a great help

Noony