aaaaahhh...help!

[mattie]

ok heres the problem
the other day i was tightening the bolts on bottom line onto the trigger frame and one of the bolts sheared off into the grip, so natrually i ran screaming down to the store to get some screw removers, i put that in and that snapped off as well meaning that i cant just drill the bolt out (the screw remover was hardened steel) any suggestions?
matt

 

[jahlad]

doh!

ok what sort of marker

take the grips off and have a look if there is any of the bolt showing on the inside of the grip, you might be able to get hold of it with plyers

if not then try this.....drill a small hole into the centre of the bolt then loctite a small allen key into the hole....let that set like rock then try twisting that out

after that its drill and retap time im afraid

 

[mattie]

the markers a spyder clone with a hyper frame so i cant get into the bolt at the bottom, thing is tho i cant drill it out either as its steel and just snapped the drill bit last time i tried

 

[jahlad]

best advise is prob take it to someone who knows what they are doing then

 

[mattie]

might be a good plan actually
thnx
matt

 

[Tom Allen]

I'll be happy to have a go at sorting it mate, if you want me to fix it, i'll pm you my address.

 

[jokersmoker]

where abouts in north yorkshire are you mate? i live in the area and i am an engineer by trade, so i reckon i could get out for ya.

 

[mattie]

erm richmond bout 15 miles from darlington

 

[jokersmoker]

we train just outside darl at croft, so i'm up there in a few weeks mate, pm me you mobile no. and i'll pick it up, sort it and send it back for you, or just drop it into just paintball and i'll collect it from there for you.