a1 stripping

[DANTHEMAN123]

im getting my angel1 re anodized, do i need to take out the ram? if so how do i do it. ps pleasedont give me a lecture about how i cant reanodize the a1. thanks. if poosible tell me how to take it apart once ive just got the body in my hane minus the gfrip frame, eyes, solonoid etc cheers, Dan

also i cnat seen to get an allen key to fit the trigger screws to take it apart, any ideas?

 

[NinthWizard]

The maual is quite good the diagrams show quite well how to strip it. If you want PM me and i might be able to help talk you through.

 

[Dskize]

im getting my angel1 re anodized, do i need to take out the ram? if so how do i do it. ps pleasedont give me a lecture about how i cant reanodize the a1. thanks. if poosible tell me how to take it apart once ive just got the body in my hane minus the gfrip frame, eyes, solonoid etc cheers, Dan

also i cnat seen to get an allen key to fit the trigger screws to take it apart, any ideas?

you need to take out everything , including all screws , orings ,everything ,if you dont know that I suggest you get someone else to do it ..seriously

 

[AL21784]

You should have all the tools and diagrams you need to strip it all down but if you do have problem's, give the guy's ay lips a ring, or take it to the 10 man, they'll probably be there

 

[conion92]

im getting my angel1 re anodized, do i need to take out the ram? if so how do i do it. ps pleasedont give me a lecture about how i cant reanodize the a1. thanks. if poosible tell me how to take it apart once ive just got the body in my hane minus the gfrip frame, eyes, solonoid etc cheers, Dan

also i cnat seen to get an allen key to fit the trigger screws to take it apart, any ideas?

if you are sending it to sloth, they will strip it for you at extra cost, if you are unsure how to do it

 

[custard cavalier]

Get lips to do it for you,there are magnets and grub screws in the body if you try digging them out and damage how they sit you could end up screwing the whole thing up.the other thing is it could void any warranty you have if its done by someone else.Ask wdp or lips were you stand.