A fEw ion questions..

[Quicktime]

Got me an ION and the guy gave me the wrong manual (Evo hopper ones!?) anyway..

I dont know much about the board, just know how to turn it on and switch between modes and which button is for programing. I would love to know what dwell is?

Another question is if you change the REG on the ION how do you set the FPS? on a stock ion you use the Spanner?

Thanks alot.

 

[danrandon]

visit www.smartparts.com and you can download the manual from there

 

[Graham-DV8]

Someone posted this thread up last week, should help you out

http://67.19.5.132/vb/showthread.php?s=&threadid=53100

 

[Quicktime]

Thanks, didnt answer the FPS prob though

 

[crumpler]

actualy thats a really good question, i am going to get a reg soon and b=never thought about that. any one got an answer??

What i think is there is a way to choose what preasure goes in to the gun on a new reg (CP reg) same as the stock one

But corect me if im wrong?

 

[SteRoberts]

it depends from regulator to regulator, but usually you use an allen key to unlock a locking nut, then you turn a bit on the reg to increase / decrease pressure and then lock it with the allen key again.

 

[bulldog2k]

Dwell is the amount of time the bolt spends in the forwards position. Less dwell = more air efficient but needs higher pressure to compensate.

You may find www.zdspb.com useful