dude
go to
www.rswww.com and buy the parts yourself, you need a 9v battery conector and a dual pole push micro switch (needs to break both circuits). solder 2 wires from the shocker board to the 2 center pins on the switch (mount the switch on the back of the solinoid tray, 5mm hole) then solder the 9v battery conector to the normally open pins. you can also add a 18V led to the back of the solinoid tray if you wish this just needs to be soldered to the 2 centre pins the same as the wires to the board.
switch 103-5776
sealing hood 119-3692
led 361-4034
9v battery connector 489-021
the above numbers are the rs numbers approx cost £12
easy really
HTH
Bruce