2k2 timmy

[andy2818]

ive got a 2k2 iron men timmy is there another board i can fit in it if so where can i get one from or can i get a board and one of the newer grips so the screen is in the grip as my board seems a bit iffy because when i change settings ie set to 14 bps then exit it goes back to 12 bps and sometimes when i turn it in and pull the trigger it takes about 1 sec to fire ?? is it the board is there something i can do to it to fix it

many thanks andy

 

[swave_gav]

what type of board doe it have just now? sounds like your not programing it right and its eyes are set in delay mode,
uni 1 boards from lucky are good get 1 of them and a chip of sorts,


clicky

 

[andy2818]

my board says lcd ver 1.4.3 will one of those boards fit mine i have read the manual all the way through and done what it says and it still stays on 12 bps it will be on 14 bps when i turn it on but then as soon as i pul the trigger it will change i have even set the micro swiches so it is set to 14 bps but it still changes

 

[swave_gav]

are you shooting paint when your pulling the trigger, that board switches to 12 bps when theres an eye fault ,if it has all the dip switchs on the back program it from there and put no 9 in on to bypass the eyes to test it

 

[andy2818]

my bad

 

[andy2818]

i have tried it with and without paint i will turn the eyes off will it chop paint if they are off and will i be able to keep them off even when playing how can i fix the eyes if they are not working right

 

[Sid Sidgwick]

You can get a few boards mate (WAS, Frenzy ect) I had a WAS board in mine and it was great, You can probably find a board quite easy just stick a post up in the classifieds. Bring it down to training, John is good with Timmies (If he comes down) and ill take a look at it and see what we can do.

Sid

 

[andy2818]

cheers sid is training on next sunday