2002 cocker with eblade -- leaking help

[trojen]

my marker is leaking from the solonoid i have an ajustable lpr ive tried turning it right down till its not cocking then reajusting it but when it is reajusted it doesnt seem to be firing paint proparly i tried turning it up a little more but starts leaking any advice would be much appreciated.

 

[Skeet]

Have you taken the Noid apart?
Take it to bits...replace and lightly grease the gasket...screw the screws in real tight...try the reset button..its the red one on the bottom of the noid...I think...

 

[trojen]

i have no air left to try at the moment but will try tomorow. sorry for my ignorance but wot is the noid ? is it the black round plastice bit with the o ring inside the lpr .

 

[Skeet]

Noid is short for solenoid!...

 

[trojen]

thanxs

thanx m8 just new to the cocker and dont know enything about them like i sead will try tomorow and post on this thread tolet you find out how i got on thanxs again

 

[pb-afroman]

This is a longshot, but I had a friend give me a tickler reg for my eblade, and when I put it in the front end would leak out of the noid like crazy. It didn't matter whether I turned the pressure on the LPR up or down. Eventually I gave up with the tickler and put the stock reg back on and it worked fine. I think that either the tickler was dirty or somehow jammed so that it really was not controlling the pressure. I cleaned out the ticker and I think the piston may have been jammed, but I never tried it out again so I'm not sure.

I guess what I'm trying to say is check another LPR and see if that isn't your problem.

 

[Pinchaaay]

Solenoid leaking -

If it's leaking from the barbs, check hoses for lacerations & poor connectivity.
or.........
Remove barbs, clean the threads and loctite them back in place.(DON'T OVER TIGHTEN THEM DUDE )

If it's leaking from inside the solenoid manifold, check the lpr pressure. Shouldn't be more than 90 psi

Check the noid retaining screws for their tightness

If the leak is still there strip it, clean it then lubricate the solenoid and gasket.

If you have a problem stripping the solenoid, i can help you out dude, piece of cake.

"Pinchaaay!"

 

[trojen]

thanxs all

i would like to thank everyone for the help ive been given on this post. but it seems fixing this marker is beyond me . so ive desided to send it off to get fixed ive tried the things people have told me but there must be more wrong than i first thought. thanx again for the great advise and tacking the time to post on
this thread. if it wasnt for people like you people like me would be f***ed ..

 

[Skeet]

If your sending it to Planet..make the most of the £20 postage (special delivery, insured to £1000) and get a 44 Ram and QEV's fitted as well mate...you wont regret it...and a Supercharger...hell, get the Nexus kit fitted..and dont tell em about the leak!!!

 

[Ledz]

Probably best to tell us about the leak so we can fix it !!

LEDZ