Euromag not cocking the trigger after a few shots

[John C]

Yeah sounds like your almost there.

When you take a few shots, the air system has to recharge.
Its pressure drops and it cant kick back the trigger.

Id always recommend an adjustable output air system on a RT mag. One that can do 1000psi.
But tweaking the ULT would also sort it.

 

[GouveiaUK]

Thanks, al increase the output see what happens. Thinking of selling it.
thankyou all for your replies...

 

[Alex R]

Also try loosening the rear bolt a tad (the round one with the small hex key hole) below the bolt, some times that can prevent the gun functioning and cause the chuffing sound, I had to take my out and place a washer on the screw then replace it back in, I think the minimum operating pressure is some thing like 800-850psi also make sure you put 6-7 drops of oil in the asa before use (you may already do, but I've known some who don't). I think Mags are really for those who appreciate the engineering and like to tinker.

If in doubt call Lambchop at the shop, he'll gladly help

 

[EELZ]

It must have been your input pressure because after buying it off you and putting 1000psi into it and adding an extra ULT shim this thing absolutely fly's

bye,bye to my A1 soon i think.

cheers.

 

[Bolter]

It must have been your input pressure because after buying it off you and putting 1000psi into it and adding an extra ULT shim this thing absolutely fly's

bye,bye to my A1 soon i think.

cheers.

Still quick as fook huh?

 

[EELZ]

oh yes,

my first marker was a eclipse mag back in 2001 and I always wanted to try a x valved/lvl 10 one....

pure magic.

 

[Gee Tee]

You should see one go with an electro frame + eyes

I tried my ULT on high pressure - on the right shimming it was a bit mental

 

[Bolter]

You should see one go with an electro frame + eyes

I tried my ULT on high pressure - on the right shimming it was a bit mental

Thats not high pressure!

http://www.zakvetter.com/paintball_videos/34bps.mov

 

[EELZ]

You should see one go with an electro frame + eyes

I've seen loads of pneu-mag vids but I think electro-ing one spoils the beauty and simplicity that the .68 automag is all about and to tell you the truth I don't think their as fast as a ult'd 1100-1200 psi in-putted reactive trigger

as Andy Sables shows here;

 

[Gee Tee]

I agree the RT effect of the ULT + 1000+ psi is very fast. However I found it was also a nightmare to set up reliably. It would shoot great for a few games, then go full auto or stop shooting until the shims were adjusted. Getting it to fire long strings using RT's bounce effect was a difficult trick to master, not helped by increased pressures making return more snappy. I even tried a RPG Viper (roller trigger) in the Intelliframe, but still wasn't 100% happy with it.

The Egomag conversion isn't as fast as the maxed R/T effect, but it's far more reliable at realistic ROF. I've got a chop free 15bps out of it so far, with more to come with fine tuning. It also cycles ok at around 850psi which let's me shoot further into the tank. I'm really chuffed how my DIY Emag turned out

It'll be out for re-annodising in a few months, so I'll post some photo's of the rebuild.