can you use co2 with a ion

[sparrow]

like i said in the title can the ion use co2 or is it just air ??
thanks

 

[I can't shoot straight]

You can but you will f**k up the orings. And over parts I would think.

Seb

 

[paintballJett]

Its possible

Yes its possible and it will work, but you cant go back to Air its a big no-no.

I would advise not but my mates run theirs on C02

 

[arg1271]

it's possible but I would strongly advise against it.

rapid firing using CO2 can cause you marker to freeze up, add to that moisture and electrics don't work well together when you manage to defrost it.

Air all the way....

 

[paintballJett]

Why do you want to run it on CO2??? Stick with Air!

 

[ioufx]

I agree, put it through air, much safer and better for the marker imo.

You can run it through anti-syphoned CO2, but i advise against it where possible, if it freezes your internals which is likely, it will ruin your gat

 

[whatalotigot]

No

No you cannot.. use air anyways alot better

 

[Marcus Geezer]

Yes its possible and it will work, but you cant go back to Air its a big no-no.

I would advise not but my mates run theirs on C02

Cant go back to air... what a load of tosh....

Keep your bps to below 6bps to stop your reg, board, and whatever else freezing up.... ARG speaks the truth...

 

[recoil101]

And dont forget that it would need to be a anti-siphon take too so that you dont get any liquid co2.
But like others have said rather don't.

 

[Dave284]

its good to use, just remember to microwave you're ion after every use, 850wt for 3 minutes, then add a table spoon full of water and place back in the microwave for a further 2 minutes.