Help needed

[rkid]

Hi i have a dive tank with a fill rig.
I have a problem were You press to release the air before you remove the bottle is leaking. Were can i get this fixed ?

Thanks for your time in reading and thanks for your help
jay

 

[Tom Allen]

If you get no joy, i can sort it for you.

 

[rkid]

If you get no joy, i can sort it for you.

okay thanks

were the pin pushes through there is like a metal o ring with a split in it, Do you think thats why ?

 

[Tom Allen]

that sounds like a circlip, and it should be there. What's actually wrong with it.

 

[rkid]

that sounds like a circlip, and it should be there. What's actually wrong with it.

hook the bottle up turn the valve, And it leaks air out the end were release air pin comes out when you push it.

 

[Tom Allen]

sounds like one of the internal o-rings are damaged.

 

[rkid]

sounds like one of the internal o-rings are damaged.

Would a dive shop fix it ?

If not are they easy to strip ?

 

[Tom Allen]

piece of cake to repair, carefully pull the circlip off and push the plunger out making sure the spring is not lost. Change all the o-rings and re-assemble.

I can do this for you if you're not sure about it, or a dive shop may be able to sort it. Depends whether they keep loose o-rings, as most of their o-ring changes are complete kits.

 

[rkid]

piece of cake to repair, carefully pull the circlip off and push the plunger out making sure the spring is not lost. Change all the o-rings and re-assemble.

I can do this for you if you're not sure about it, or a dive shop may be able to sort it. Depends whether they keep loose o-rings, as most of their o-ring changes are complete kits.

When i get home i will give it ago, If i do not get no joy i will let you now thanks for your help.

were do you get the o rings from i got louds for my gun will any of them fit ?

 

[Tom Allen]

i doubt the standard gun orings will do, as you need harder ones in the fill rig.