help for a little project, soldering required

[robof9]

I have an idea for something great.

as we know the pulse uses a rf module that has to be soldered to the gun, i had an idea. that will let anyone use it

make an adapter for it so it can be plugged into any marker.

i dont know where to get the bits from, but i do have the idea, i just hope someone can put it into practice.(and send me a free one or 2)

pic below, crappy drawing but u get the idea

this will work for most gats i know of, but will need testing out, sure it would work.

btw if spike is watching, tell me if you have tried this in testing, so i dont waste my or anyone elses time

ta.

rob

 

[Lucky]

The only problem you have there is that each type of gun will use it's own harness so you'd have to have 20 different harnesses and i bet you couldn't identify the bits

http://rswww.com/cgi-bin/bv/rswww/home.do?cacheID=uknetscape&returningUser=N

http://www.maplin.co.uk/

You find the bits, and i'll solder them for you

 

[robof9]

dm, timmy, ego, cocker, use the same plug and i am sure others do too, and as i own ego's, this is the one i want to do

 

[Kitch]

yeah thought of this the other day when pulling apart a PMR to see how it works

 

[Dusty]

yeah thought of this the other day when pulling apart a PMR to see how it works

hehe, as we all often find ourselves doing of an afternoon.................

 

[Raffles]

TBH - I'm suprised DXS didn't think of this. An 'adaptor' would be very easy to make.

BTW - you don't actually need to solder to the noid plug bit - you could always use miniature scotch locks (their bigger brother gets used in cars a lot).

I'll have a look at knocking something together this weekend.

If I do make any - I'll make sure Rob gets one for free .

 

[robof9]

thanks guys, if we manage to get a working prototype then i recon the yanks will love this

 

[SwissTony]

You find the bits, and i'll solder them for you

And then if u want a decent job done of it, I'm available.
Can get hold of most parts and I can do very detailed solder work.

 

[Spike]

TBH - I'm suprised DXS didn't think of this. An 'adaptor' would be very easy to make.

BTW - you don't actually need to solder to the noid plug bit - you could always use miniature scotch locks (their bigger brother gets used in cars a lot).

I'll have a look at knocking something together this weekend.

If I do make any - I'll make sure Rob gets one for free .

He he in my former life (when I haven't eaten a banana) I designed wiring harnesses.

What i can say is that we have looked into this and we are already working on it. There just was not enough time before the product launch to get anything out.

As mentioned some boards do use other connectors which will give us some issues but TADAO is already doing something similar on his new boards so that is always another option for some.

I will post info once I get more use but is nice to see we have creative minds at work here.

 

[robof9]

thanks spike for the comments, i didnt think this would be overlooked.

swiss, if u can do one, pls do, i will need one, as i run 2 ego's and i plan on having 1 rf unit