Quickest and dirtiest fix for this is to turn your reg right down - then slowly back up.
It worked for the 4 I did
.
It worked for the 4 I did
.yet more ion help
- Thread starter badd701
- Start date
badd.
Have you lowered the dwell to 12-16?If you have and the problem is still there,please post here and i will help.
Have you lowered the dwell to 12-16?If you have and the problem is still there,please post here and i will help.
lowerd the dewll and still doesent work put the orignal banjo on and it dosent work leaks coming from the bolt
Did you try my 'trick'?
Have you shot a few times (with or without paint)?
Sometimes it can be as simple as the fact that the bolt has stuck forward a little (check around it for shell/damage etc).
What I did to mine was to simple turn the reg all the way down (so no input to gun - hence no leak), then turn up gun a little at a time while chrono'ing it.
Result = no leak and a steady fps.
Have you shot a few times (with or without paint)?
Sometimes it can be as simple as the fact that the bolt has stuck forward a little (check around it for shell/damage etc).
What I did to mine was to simple turn the reg all the way down (so no input to gun - hence no leak), then turn up gun a little at a time while chrono'ing it.
Result = no leak and a steady fps
.
Don't use PDFEDT tape, especialy on internal banjo threads its asking for trouble!!
ok raffles ill try ur trick at the weekend as i dont have a chrono here lol might be a thing to buy in the future
*edit all is not sorted!!!!!* for the love of god please some one help me. it is leaking down the bolt. i can put my finger in the bolt and it gets pushed out, its a fire bolt and before you say it ive checked the internal o ring, infact ive checked every posible o ring there is and changed them all ive done everything it says on zds paintball and still no joy any smartpart ion techs anywhere? or anyone know wat i should do to fix it
help!! cheers
help!! cheers