Ion problems

[darren maskell]

Ok i have an ion as a spare and i carn't get the eyes to work or get it out of ramp mode two guys who have ions could'nt do it eather could it be a nackard board or opperator problems please help Ghandi .

 

[Paontball Mad]

batterys OK?

 

[badd701]

wat board and eyes u got?

 

[darren maskell]

The batterys new and the board and eyes are standard the marker works fine and rips bar that im stuck.

 

[lemonadeX]

Okay to get it out of ramp mode (down to semi) open up the grips and press the programming button until you get double blink red.

I think then you just have to press the power button once to go down to semi mode.

-Will

 

[Paontball Mad]

are your eyes bent?

 

[darren maskell]

Thanks i'll try that but i think one of the guys tried that at least 10 or 12 times and as for my eyes mine are crosssed but i'll check the ones on the ion thanks guys i'll try that Ghandi

 

[joeyarmstrong]

Firstly, are you in eyes ON mode? (the first mode when you switch the gun on)
Secondly is your eye cable in? If so are they in, in the right way?

As for getting to semi-will is right.

take off the left grip screws.
Switch ion ON
Press programme buttom until double red flashing sequence appears.
Press ON buttom once ( a yellow flash will appear when you do this)
Fire marker
Semi Mode set.

Bobs your uncle

 

[J@mes]

is the eye wire in properly, both board and eyes, are the eyes clean, try taking them out of the chamber, and turning on the board out of the grip, and see if they work then.

-james

 

[darren maskell]

Thanks james i'll give that a try too if that dont work whats the best board and eye set up out.