Geo + not firing

[mrb2287]

Ok so iv got a Geo +
I bought it with an air leak
Replaced the manifold as it was cracked and the manifold gasket, wound the pressure back down and stopped the leak. Replaced the 14 x2 ,17 and the 18 round the can and it suddenly stopped firing (bolt not moving)
Had a reg tester on and pressure is around 115/120psi, battery is a brand new procell.
Since then all o-rings have been changed but still no change, bolt is not moving.
Dwell has been set to 14.5 (standard)

Anyone got any ideas as im at the end of my rag with it!

Cheers
Rob

 

[Jim Jam]

You have fixed the problem but encountered another.
Have you stripped the Lube and re-lubed it again?
(Worked on a DM/NT11)
So might be worth a try.

Best of Luck Rob!

 

[mrb2287]

Yea tell me about it, fixed 2 bloody leaks now!
Yea its been cleaned and re-lubed everytime iv had the bolt out.
Tried different pilot valves

 

[Jim Jam]

Ahh fair enough, all the best Rob!

 

[cambojnr]

dont you work at just? why not just get thib to have a look at it for you

 

[mrb2287]

Yea he gave up on it, it was annoying him as much as me!

 

[cambojnr]

typical frenchie, giving up lol

 

[mrb2287]

Haha we spent ages on it but no joy

 

[cambojnr]

well am usless with teching so I just leave my ego well alone.

 

[Luke H]

might be worth checking the solenoid wires in case they're damaged, also when you turn the gun on and pull the trigger, is the screen showing that the trigger pull is registered?