Welcome To P8ntballer.com
The Home Of European Paintball
Sign Up & Join In

Angel a1 fly prob

tomo110290

tomo110290

PMGWC #90
May 16, 2008
1,023
34
83
middlesbrough
P5YCH0 SN1P3R said:
you got pressure testers?
Click to expand...
No i dont i did gave some for my LCD but i sold them should of kept them :D but the LPR you cant adjust without shims so thats should be ok and ive turned the air off on the HPR and slowly turned it on and still the same no air coming from the bolt
 
Last edited:
GRIMLOCK

GRIMLOCK

Well-Known Member
Jun 18, 2011
769
149
78
32
it *looks* like your hpr may be waaay too high meaning the hammer cant break the poppit seal
 
GRIMLOCK

GRIMLOCK

Well-Known Member
Jun 18, 2011
769
149
78
32
de gas the marker fully and try to open the valve stem with the hammer
 
GRIMLOCK

GRIMLOCK

Well-Known Member
Jun 18, 2011
769
149
78
32
use the bolt to push the rammer forward till it gets resistance then push harder to see if it pops the poppit. if it doesn't then that's your problem if it does then the hpr or lpr are set wrong
or theres a blockage between the hpr and the pressure chamber
 
Last edited:
tomo110290

tomo110290

PMGWC #90
May 16, 2008
1,023
34
83
middlesbrough
P5YCH0 SN1P3R said:
use the bolt to push the rammer forward till it gets resistance then push harder to see if it pops the poppit. if it doesn't then that's your problem if it does then the hpr or lpr are set wrong
or theres a blockage between the hpr and the pressure chamber
Click to expand...
Ok i did what you said and the ram is opening the valve fine
 
no-infernomark

no-infernomark

I think therefore I am.
Sep 19, 2005
1,529
53
83
38
Kettering
tomo110290 said:
Ok i did what you said and the ram is opening the valve fine
Click to expand...

that sounds exactly the same as mine did, turned out it was the stem valve. the guys at NPF or the tech tent will service it cheaply if you in to that type of thing.

have you taken the stem valve out?
 
You must log in or register to reply here.
Top Bottom