Welcome To P8ntballer.com
The Home Of European Paintball
Sign Up & Join In

Ego10 help

Lovetone

Lovetone

Peter Pan of Paintball
Feb 25, 2005
4,208
47
73
Manchestoh
www.myspace.com
Just out of interest, does it shoot?

Things to check - clean the eyes and make sure there is no paint in the eye holes, or in the breach. Also, clean the front of the eye sensors.
Also, check the connections to the wires on the board, and check that nothing is pinched between the frame and body / trigger.

Lastly, fresh battery?

Sounds like there is dirt in the eye areas to me.
 
Sid Sidgwick

Sid Sidgwick

Tinkering ain’t easy
Feb 23, 2006
3,975
620
148
40
The cold north beyond the wall
www.bzpaintball.co.uk
If you have cleaned the eyes, checked the breech for muck, checked the eyes are aligned properly and check the wires to make sure they aren't nipped then I'd try resetting the board to factory settings and if that doesn't work then send a message to Stonesoldier on the forum (go to the planet section at the bottom) and see what he says mate.
 
Lovetone

Lovetone

Peter Pan of Paintball
Feb 25, 2005
4,208
47
73
Manchestoh
www.myspace.com
ricktick1 said:
for got to say it doesen't shoot.
Click to expand...
ok well that means that there is a problem with the air system.
check your air supply, check the macro etc, try someone elses bottle.

if you just take any eclipse gun, no air no paint, turn it on, its like this

( ) eyes good, nothing in breach
stick your finger in the breach you get this (0)
pull the trigger, and the bolt wont move, no paint get shots, and the software doesnt see a "gap" which it would if it had shot a ball, while the next ball falls in the breach.
immediately the display will show ] indicating eye problem

im fairly sure its an issue with your air supply.

alternatively, turn the gun on, hold the top button for second to turn the eyes off.
you should see this )
then if you can dry fire, you can elimiate the air system being an issue.
 
You must log in or register to reply here.
Top Bottom